Posted by Adam Devo on January 11, 2002 at 18:28:38:
In Reply to: Re: programming pics posted by Priest on January 11, 2002 at 17:23:35:
: Have you also verified that the chip is programmed correctly ? I know its a dumb question but you never know :)
: Also its useful if you are not sure you are getting output to use a hyperbright red led instead of an IR led to see if it works (a hyperbright will also set a sensor off from a few inches away so you can still make sure it hits).
Well I'm pretty sure the chip is being programmed correctly as the two input triggers seem to be set as inputs, and the rest set as outputs; I will double check this. Trying the ultrabright LED idea sounds good... it would help me to at least know what the chip is outputting.
Thanks Priest
Adam Devo